PHOTRON FocusScope SV200-i - Slow Motion, High Speed Camera Solutions & Digital Video Motion Analysis

ALL PHOTRON CAMERAS
Fastcam PCI		Ultima APX-RS
Fastcam-X 512 PCI		Fastcam LR
Fastcam-X 1024 PCI		FocusScope SV200-i
Ultima APX		Fastcam SA-1
Ultima APX i2		Fastcam MH-4
Ultima 512

PHOTRON FocusScope SV200-i

Designed specifically for high speed microscopy.

The FocusScope SV200-i incorporates the latest Generation III image intensifier technology to offer enhanced image resolution and broad spectral response from the 280 – 720nm (peak sensitivity 530nm).

Providing recording rates of up to 2,000 fps at 512x512 pixel image resolution the FocusScope SV200-i utilizes the high resolution performance and broad spectral response of Generation III image intensifier technology to provide an integrated imaging solution for high speed microscopy applications.

To obtain the highest optical efficiency the FocusScope SV200-i camera head incorporates a 512x152 pixel advanced CMOS imaging sensor fiber-optically coupled to an 18mm Generation III image intensifier module. The camera head provides a C-mount thread for attachment to standard optical microscopes and objective lenses. Image intensifier controls are conveniently located on the camera head.

A single 6 meter cable connects the SV200-i camera head to a standard PCI format control card. Incorporated on the control card is 2.6GB recording memory allowing a recording time of 8.2 seconds at 1,000fps with 512x512 pixel image resolution.

System control is achieved through Photron FASTCAM Viewer (PFV) software providing an intuitive operation environment. FASTCAM SDK software provided with the system allows user specific control commands to be integrated within other environments.

Photron FocusScope SV200-i
Photron FocusScope SV200-i

Designed specifically for high speed microscopy

FEATURES

System designed for extreme low light fluorescence and microscope recording at high frame rates.
Advanced CMOS imaging sensor offering 512 x 512 pixel image resolution at frame rates up to 2,000frames per second.
10 bit sensor dynamic range.
Global electronic shutter providing exposure durations from 1/frame rate to 4ìs independent of frame rate.
Extreme light sensitivity provided through a fiber optically coupled Generation III high resolution image intensifier. [luminous gain 2.2 x 104 (lm/m2)/lx]
GaAsP photocathode providing broad spectral response over the range 280 – 720nm (peak sensitivity 530nm).
Intensifier over brightness protection through phosphor surface current detection.
Small and lightweight camera head suitable for integration with standard optical microscopes.
User selectable Start, Centre, End and Manual trigger modes.
Integrated system operation through FASTCAM Viewer control software and FASTCAM SDK.

PRODUCT SPECIFICATIONS
Download Product Data Sheet - Adobe PDF

*For purchasing and more information, please contact us toll-free at 1-877-7ITRONX.